Right speaker - innards
Old lipo
Green PCB
DMM A/D
No external fuse access ;-(
Crappy substrate
Smoke detector - PCB
Smoke detector - PCB
Optical smoke sensor
Optical smoke sensor
RGB LED Ring - 2nd prototype
RGB LED Ring - 2nd prototype
RGB LED Ring - LED test
RGB LED Ring - LED test
RGB LED Ring - LED test
RGB LED Ring - LED test
New batch of boards
RGB LED Ring - V1.21 front side
RGB LED Ring - V1.21
Lord Helmet
PLCC2 variant - back
Code name: Lord Helmet
Code name: Lord Helmet
PLCC2 variant - front
Dimmed inner ring
Bodge wire
IMGP3834
IMGP3835
IMGP3837
Overheated shunt resistor
Overheated shunt resistor
Removing a relay
Digital power supply
Bad solder job
Bad solder job
C20 just doesn't fit
Junghans Radio Clock
Junghans Radio Clock
Junghans Radio Clock
Junghans Radio Clock
Junghans Radio Clock
Junghans Radio Clock
Junghans Radio Clock
Junghans Radio Clock
Junghans Radio Clock
PIR board
One through hole part
Reflow mishap?
Ohhh, didn't expect that.
Step-down converter
This is what I got
Shifting the focus
Shifting the focus
Assessing the situation
Shifting the focus
Micro USB socket
The most challanging part
Inserting the micro USB socket
IMGP5997
First tack on the body
Nice symmetry
Tacked the socket down
Adding flux
Right speaker
Nice attention to detail
Input board
Input board
Input board
Main amp
IMGP4433
I think I need a light tent
Old vs. New
Old vs. New
Old vs. New
Impossible to capture the true purpleness
Testing...
Fixing the LED pin issue
Lighting up my kitchen workspace
Application of 'glue'
Too much 'glue' ?
Adding the magic goop
Solder paste - a bit too much
Where do I get an X-ray machine?
Yes... it is TINY!
Looks BGA-ish
0402 LED - Phew...
Dirty little suckers!
Nichia NSPWR70CSS-K1
WHAT was I thinking?
Wrong choice of footprint
ChipQuik to the rescue
Resistor's new home
Offender removed
Patch applied
Hopefully fixed - 8 more to go
Tinned
Mask removed
Waiting resistor
About to cut a trace
Cut trace
Planned ESD protection
Hotplate SMD reflow
He's dead Jim!
Trying to get good pin alignment
Pogo-pin adapter PCB
Pogo-pin adapter with assembly jig
Using the jig to assemble the pogo-pin adapter
AVR ISP pogo-pin programming adapter
AVR ISP pogo-pin programming adapter
There's a tiny spring inside!
These things are delicate
AVR ISP pogo-pin programming adapter
Pogo-pin programming adapter at work
AVR ISP pogo-pin programming adapter
AVR ISP pogo-pin programming adapter
Pogo-pin weak spot covered with blob of solder
AVR ISP pogo-pin programming adapter
AVR ISP pogo-pin programming adapter
Workplace
Iteadstudio 'Mystery PCB' service
Elecfreaks freebees - SO adapter
Elecfreaks freebees - adapter board
Fixed
Removing the gunk
Bodge job
Keywords
Authorizations, license
-
Visible by: Everyone -
All rights reserved
-
73 visits
- Keyboard shortcuts:
Jump to top
RSS feed- Latest comments - Subscribe to the comment feeds of this photo
- ipernity © 2007-2024
- Help & Contact
|
Club news
|
About ipernity
|
History |
ipernity Club & Prices |
Guide of good conduct
Donate | Group guidelines | Privacy policy | Terms of use | Statutes | In memoria -
Facebook
Twitter
Sign-in to write a comment.