The most challanging part
Inserting the micro USB socket
IMGP5997
First tack on the body
Nice symmetry
Tacked the socket down
Adding flux
Got a little solder bridge
More flux added
Cleaning with IPA
Done!
Akafugu LED candle
Assembly tools
Weller RT3 tip
Weller WSM 1 - soldering pencil
Weller RT3 tip
Weller RT3 tip
Weller WSM 1 - soldering pencil
Weller WSM 1 - soldering station
Weller WSM 1 - soldering pencil
Weller WSM 1 - soldering stand
sac8250_lead-free_2
sac8250_lead-free_3
sac8250_lead-free_4
sac8250_lead-free_1
Tacking down the RGB LED
Finished RGB LED
Tacking down the ATmega168
Left side done
All sides done
Close up of the pins
OSHStencils.com
Machine assembled
YOUYOE 858D+ hot air soldering station
A little mishap
Soldering for masochists
Shifting the focus
Assessing the situation
Shifting the focus
Shifting the focus
This is what I got
Bad solder job
Bad solder job
Fixed
High-quality soldering
Semi broken WMRP RT3
In it goes
Application of 'glue'
Too much 'glue' ?
Adding the magic goop
Solder paste - a bit too much
Fancy packaging
Where do I get an X-ray machine?
Yes... it is TINY!
Looks BGA-ish
0402 LED - Phew...
Dirty little suckers!
WHAT was I thinking?
Wrong choice of footprint
Resistor's new home
Offender removed
Patch applied
Hopefully fixed - 8 more to go
Tinned
Mask removed
Waiting resistor
About to cut a trace
Cut trace
Planned ESD protection
Hotplate SMD reflow
Tube of solder paste - Edsyn CR44
Foolproof marking?
What to do with it?
Perfect fit!
Trying to get good pin alignment
Using the jig to assemble the pogo-pin adapter
AVR ISP pogo-pin programming adapter
AVR ISP pogo-pin programming adapter
There's a tiny spring inside!
These things are delicate
AVR ISP pogo-pin programming adapter
Pogo-pin programming adapter at work
AVR ISP pogo-pin programming adapter
AVR ISP pogo-pin programming adapter
Pogo-pin weak spot covered with blob of solder
Fixed - which one ?
Weller WMRP RT4 - New tip
Offending LED removed
Flux transfer - success
One out of 300...
Flux transfer - 1st attempt
Integrated O-ring
New flux-capacitor
Damaged Flux-capacitor
That tip has had it - Weller WMRP RT3
The Bastard!
Please stay in there!
The fight is over
Keywords
Authorizations, license
-
Visible by: Everyone -
All rights reserved
-
102 visits
Micro USB socket
No wonder this is a bit tricky to do with a soldering iron. For this you will really need a small tip.
- Keyboard shortcuts:
Jump to top
RSS feed- Latest comments - Subscribe to the comment feeds of this photo
- ipernity © 2007-2024
- Help & Contact
|
Club news
|
About ipernity
|
History |
ipernity Club & Prices |
Guide of good conduct
Donate | Group guidelines | Privacy policy | Terms of use | Statutes | In memoria -
Facebook
Twitter
Sign-in to write a comment.