Lets see...
Not enough space
Not enough space
Perfect fit!
What to do with it?
Foolproof marking?
Boxed up
Tube of solder paste - Edsyn CR44
Hrmph!
Parts!
Just two - ATtiny84
He's dead Jim!
The first and probably...
Mouser
We have parts too
It's an old radio
ChipQuik to the rescue
ATtiny85 custom J-leads
Humidity indicator card
Linear potentiometer
TC33X2-202
Linear potentiometer
Wrong choice of footprint
ATtiny85 custom J-leads
WHAT was I thinking?
Tube of LEDs
Nichia NSPWR70CSS-K1
New parts - enough for 3 boards.
SO-20 is so huge...
What will I do with the 64er ?
0402 LED - Phew...
Big is beautiful
Looks BGA-ish
Little bro
SMPS power supply for the LEDs
Yes... it is TINY!
Where do I get an X-ray machine?
3 of these just failed
Something new every day
Wonders of technology
Dead RGB LED
The battery mauling reading light
TQFP32 vs. MSOP10
33µH inductor
10µH 1.83A inductor
33µH inductor - naked
ATmega168 chips en masse
Ice Tube clock - parts 1/2
Electronics goody bag
600x 270Ω - Resist !
ATmega64
Piranha 6pin RGB - diffused
ATtiny13 + ATmega32
Tiny SMD capacitor
ATmega168 SMD chips
Tiny SMD resistor
Debugging an ATmega168
Sega Game Gear soundcard
Salvaged dual N-MOSFETs
Box of parts!
WS78L05
10-turn Potentiometers
Mountain of heatsinks
Void
Trying to get good pin alignment
Using the jig to assemble the pogo-pin adapter
AVR ISP pogo-pin programming adapter
AVR ISP pogo-pin programming adapter
There's a tiny spring inside!
These things are delicate
AVR ISP pogo-pin programming adapter
Pogo-pin programming adapter at work
AVR ISP pogo-pin programming adapter
AVR ISP pogo-pin programming adapter
Pogo-pin weak spot covered with blob of solder
Assembly jig
AVR ISP pogo-pin programming adapter
AVR ISP pogo-pin programming adapter
Fixed - which one ?
Weller WMRP RT4 - New tip
Offending LED removed
Flux transfer - success
One out of 300...
Flux transfer - 1st attempt
Integrated O-ring
New flux-capacitor
Damaged Flux-capacitor
Workplace
Found some solder!
The Bastard!
Please stay in there!
The fight is over
Iteadstudio 'Mystery PCB' service
Fixed
Removing the gunk
Bodge job
EDSYN FL-22 paste flux
EDSYN FL-88 flux pen
What naughty PCBs end up as
A PCB coaster
Product of dry solder tip cleaning
Product of dry solder tip cleaning
A PCB coaster
Defective PCB - back side
Defective PCB - front side
A strange game...
Jyetech - replaced ATmega64
ChipQuik SMD rework - dead chips
SMD rework - ChipQuik test set
perfboard madness
Purple everything!
Excessive packaging
EXPLI.de - "grand prize"
LED - uniformity issues
imgp2000
Ah Xmas... the time to
imgp2001
Ah Xmas... the time to
Ah Xmas... the time to
imgp2006
UP/DOWN contacts
imgp2007
IR-upgraded Ikea Samtid
ATtiny13 LED-strip controller
IR-upgraded LCD backlights
See also...
Keywords
Authorizations, license
-
Visible by: Everyone -
All rights reserved
-
99 visits
He's dead Jim!
![He's dead Jim! He's dead Jim!](https://cdn.ipernity.com/133/68/93/23346893.66211b7a.640.jpg?r2)
![](https://s.ipernity.com/T/L/z.gif)
Seems it was a wise decision to use a socket for this one.
Side note: now I know what I forgot. A voltage regulator. And connecting a 5V board to a 12V board will only create one thing: acrid smoke.
Side note: now I know what I forgot. A voltage regulator. And connecting a 5V board to a 12V board will only create one thing: acrid smoke.
- Keyboard shortcuts:
Jump to top
RSS feed- Latest comments - Subscribe to the comment feeds of this photo
- ipernity © 2007-2024
- Help & Contact
|
Club news
|
About ipernity
|
History |
ipernity Club & Prices |
Guide of good conduct
Donate | Group guidelines | Privacy policy | Terms of use | Statutes | In memoria -
Facebook
Twitter
Sign-in to write a comment.