Abrascico
Baldwin at war
Table incline
Steam and greens
Electric haulage
Huan He crossing
Principality Time
Coolers
Mount Street
Coal to go
Redcar landscape
Night kilns 2
Phosphate chemicals
One of each
Ironworks
The old and the new
Training
Out of season
Back alley
By the ash pit
The last ropeway
Zeche Göttelborn
Donation
Retorts
Hoffmann
Ingersley Vale Mill
Railway building
Hope Silk Mill
Power station
Chemists by Examination
Viaduct
13-20 High Street
End of the line
Ropeway remains
Saltom Pit
The Bog Train
Devil's Gate
Post Office
Shunting power
Point of Ayr gas terminal
Chapelcross
Tor Quarry
Cooling
Mr Thomas's Chop House
Tourist train
Location
Lat, Lng:
Lat, Lng:
You can copy the above to your favourite mapping app.
Address: unknown
Lat, Lng:
You can copy the above to your favourite mapping app.
Address: unknown
See also...
See more...Keywords
Authorizations, license
-
Visible by: Everyone -
All rights reserved
-
137 visits
Keadby
Keadby Bridge, more formally known as the King George V Bridge, crosses the River Trent near Althorpe and Keadby in Lincolnshire, England. It was designed by Alfred Charles Gardner FRSE MIME.
This Scherzer rolling lift bridge carries both road and rail traffic across the River Trent. It was built between 1912 and 1916 by the Great Central Railway to replace a previous swing bridge built by the South Yorkshire Railway and opened in 1864. It carries a double track railway line on the southern side, and the two-lane, single carriageway A18 road on the north side.
Its 50-metre (163 ft) electrically powered bascule (lifting span) was one of the first of its type in Britain and, when built, was the largest in Europe. Designed by James Ball and C A Rowlandson and built by contractors Sir William Arrol & Co., it has three main spans and two approach spans. The eastern main span was the one that lifted. The Scherzer bascule rolled and rotated on counterbalance. It was electrically powered, originally by a large storage battery fed by petrol-driven generators housed in the engine room beneath the east approach span. This was later modified to mains electricity.
The bridge has not been lifted since 1956. The bridge was widened and the headroom increased in 1960 and the bascule was fixed in position. At the same time, the signal cabin was removed from the bridge structure. The tracks on the railway were fixed in place.
This Scherzer rolling lift bridge carries both road and rail traffic across the River Trent. It was built between 1912 and 1916 by the Great Central Railway to replace a previous swing bridge built by the South Yorkshire Railway and opened in 1864. It carries a double track railway line on the southern side, and the two-lane, single carriageway A18 road on the north side.
Its 50-metre (163 ft) electrically powered bascule (lifting span) was one of the first of its type in Britain and, when built, was the largest in Europe. Designed by James Ball and C A Rowlandson and built by contractors Sir William Arrol & Co., it has three main spans and two approach spans. The eastern main span was the one that lifted. The Scherzer bascule rolled and rotated on counterbalance. It was electrically powered, originally by a large storage battery fed by petrol-driven generators housed in the engine room beneath the east approach span. This was later modified to mains electricity.
The bridge has not been lifted since 1956. The bridge was widened and the headroom increased in 1960 and the bascule was fixed in position. At the same time, the signal cabin was removed from the bridge structure. The tracks on the railway were fixed in place.
Don Barrett (aka DBs travels), Berny have particularly liked this photo
- Keyboard shortcuts:
Jump to top
RSS feed- Latest comments - Subscribe to the comment feeds of this photo
- ipernity © 2007-2024
- Help & Contact
|
Club news
|
About ipernity
|
History |
ipernity Club & Prices |
Guide of good conduct
Donate | Group guidelines | Privacy policy | Terms of use | Statutes | In memoria -
Facebook
Twitter
Sign-in to write a comment.